top of page
Protect 1206i  Digital and Analog Frequency Insect Detection and  Detection Detector

Protect 1206i is a new class of surveillance protection device. Unlike typical search devices, it can detect modern stealth bugs using protocols such as Bluetooth and Wi-Fi. Such insects, especially Bluetooth models, are almost undetectable by general RF detectors due to the very low power transmission and special modulation type. The Protect 1206i uses a separate channel with a high (2.44/5 GHz) frequency preselector to locate and locate Bluetooth and Wi-Fi signals with much greater precision. The device then processes the demodulated signal and determines which protocol has been detected.

The device is also able to detect all conventional listening devices (FM modulated transmitters, digital transmitters, GSM bugs, etc.) using its unique features.

>> Active correlation: While monitoring the demodulation bar graph, the scanner examines dangerous places with sound pulses

>> Digital transmission type detection: GSM, Bluetooth, Wi-Fi, DECT

> > 4 operating modes: Quiet, flood, vibrate and hybrid

> > Wide dynamic range thanks to 16-segment column chart

New Features ,

  • New broadband antenna (for ANT1 socket)  

Thanks to the wider coverage offered especially at lower frequencies, the conventional VHF/UHF detection distance was increased by 2-3 times, while perfect sensitivity was maintained in higher bands (GSM, Wi-Fi, Bluetooth, etc.).

  • New Micro-Beacon microwave antenna (for ANT1/ANT2 socket)

For the first time, a microwave log-periodic directional antenna is included in an affordable RF detector standard package. 2-4 times longer distance from all sources above 2GHz (Wi-Fi 2.4GHz, Wi-Fi 5GHz, Bluetooth, Wi-Max, LTE High, etc.). Thanks to the directivity, the exact location of the wireless source can be easily determined. Not only will you know the location of the Wi-Fi source, you will be able to quickly pinpoint it.

  • Increased dynamic range

The bar graph rises quickly when a weak signal is detected, while it rises slowly for strong signals, allowing you to locate the source.  recognizes.

  • New Debuff

The new algorithm further expands the dynamic range, making the location procedure even easier. When the bar graph is fully lit, you will be able to more precisely locate the signal source by turning on the attenuator near a strong source, causing the graphs to first descend and then rise again.

Other features

  • Very high sensitivity to Bluetooth, Wi-Fi 2.4 GHz, Wi-Fi 5 GHz and wireless video cameras

  • Excellent tool for searching all kinds of digital and analog transmitters

  • Frequency range:

    • Main antenna ANT1: 50-12000 MНz

    • Auxiliary antenna ANT2: 2.4 - 2.48 Ez, 4.9 - 5,875 Ez

  • 16-segment bar graph display

    • 3 modes: sound, vibration and shuffle

    • Correlation function finds FM-transmitters with the presence of correlation (scan sound is used)

    • 2 sensitivity levels (attenuator)

    • Long battery life

    • Durable metal body

    • Control with microprocessor

Technicial Specifications


  • Frequency range

    • Antenna 1: 50 - 12000 MHz

    • Antenna 2:

      • 2.4GHz - 2.48GHz

      • 4.9 GHz - 5.875 GHz

  • Power: Two ААА batteries (2xLR03)

  • Dimensions

    • With antennas: 120 mm×70 mm×16 mm

    • Without antennas 210 mm×70 mm×16 mm

  • Power consumption: up to 30 mA

  • Working time: up to 20 hours

  • Indicators:

    • active antenna,

    • low battery,

    • mode,

    • Describing,

    • debilitating,

    • Secondary demodulation

Micro-Pointer Antenna

  • Frequency range: 2-12 GHz

  • Type: Log-periodic array

  • Model name: LPDA-12

  • Dimensions: 53 x 84 x 9mm

  • Connector: SMA Male

sensitivity chart

00-graph 1206.jpg

Standard package content

  • Whip antenna

  • Micro-Pointer antenna

  • 2 x LR03 (AAA) batteries

  • User Guide

bottom of page